PORSCHE CAYMAN TUNE UP KIT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Em-47-7295 dual 44 type 2/4 kit w/ cleaners
This is the EMPI hpmx 44 idf dual carb kit for 1700 cc and larger engines. This kit also comes with complete instructions on installation on the 914 engine. This kit comes with a proven hex bar linkage with aircraft heim joints. Includes aluminum manifolds and all necessary hardware and gaskets. This kit comes with washable air cleaners, and chrome steel base and cover plate. These carbs come to us now tuned with a stamped identification. When switching from fuel injection to carburetors, each kits require a lower-pressure fuel pump (part number r90160810600 and a different distributor (part number r0231178009)
General Fitment 914 1970-76 911 1987-89
$1,070.91
Make a selection
Kit includes:
Software (fast load), FVD TUV version sport muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
FVD dme / ecu programming philosophy:
removal of the top speed limiter
increasing the rev limiter
modifying ignition timing...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$13,971.04
Make a selection
Kit includes:
Software fast load, sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning:
Max. Power - 272kw (370hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4500rpm
Max. Speed - 305km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.6s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of so...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,206.70
Make a selection
Kit includes:
Software fast load dme, sport air filter, header system, sound sportmufflers
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning:
Max. Power - 281kw (382hp) @ 6500rpm
Max. Torque - 430nm (317lbf ft) @ 4500rpm
Max. Speed - 305km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.5s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivab...(choose a part on the right to read more)
General Fitment 911 2005-08
$4,926.90
Make a selection
Kit includes:
Software fast load dme, sport air filter, header system, sportmufflers and endtips 3,8l to fit the mufflers to the bumper.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 239kw (325hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 259kw (352hp) @ 7000rpm
Max. Torque - 400nm (295lbf ft) @ 4500rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,337.20
Make a selection
Kit includes:
Software ( fast load), FVD export muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
FVD dme / ecu programming philosophy:
removal of the top speed limiter
increasing the rev limiter
modifying ignition timing
incre...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$15,715.50
Make a selection
Kit includes:
Software fast load, sport air filter, GT sport exhaust system
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning:
Max. Power - 290kw (395hp) @ 6500rpm
Max. Torque - 441nm (325lbf ft) @ 4000rpm
Max. Speed - 307km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we h...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,896.70
Make a selection
Kit includes:
Software ( fast load), FVD sound muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
We program our ecu's with the following modifications in mind:
Removal of the top speed limiter
Increasing the rev limiter
Modifying ignition...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$14,217.50
Make a selection
With the success of the vr825 power kit on our 997.1 turbo, it was time to package up some tested, proven, and powerful products for the 997.2 turbo. Proving that our parts work well on the Porsche turbo, our 997.1tt did a blistering 206.2mph in
1 mile! So starting from the basics, we began to build products 1 by 1 for the new pdk and 6speed 3.8l models. Our baseline dyno was done on a mustang awd dyno using 91octane pump fuel. We started with 422awhp. Each part we built the car was put back to stock and tested against it. Our final test came as an accumulation of the parts we had built making this the ultimate 997.2tt on stock turbos.
Our method of performance is simple. Good tuning, improve airflow,...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
$7,830.00
Make a selection
Kit includes:
Software fastload, sport air filter, FVD race exhaust system,
Headers with 200 cell catalytic.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 12,0:1
Max. Power - 305kw (415hp) @ 7600rpm
Max. Torque - 405nm (299lbf ft) @ 5500rpm
Max. Speed - 310km/h
Max. Rpm - 8400rpm
Acceleration 0-100km/h - 4.3s
Tuning:
Max. Power - 320kw (435hp) @ 7500rpm
Max. Torque - 430nm (317lbf ft) @ 5500rpm
Max. Speed - 320km/h
Max. Rpm - 8700rpm
Acceleration 0-100km/h - 4.0s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while r...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,844.40
Make a selection
Complete carburetion kits !
Complete kits include pre-jetted and sized carburetors, manifolds, linkage, K&N watershield air cleaners, pressure control unit, heat insulator kit, oil tank breather, fuel line & filter, clamps, injector plugs (as needed), power brake check valve (as needed) and complete installation instructions.
The pmo carburetor was designed from the beginning to be a state-of-the art carburetor. Pmo start off with a casting designed around a 50mm throttle plate and downsized to 46 and 40mm to achieve three different sizes. This compares favorably with conventional carburetors, including weber.
The air entry and flow is much greater than the weber. This is accomplished by having larger ma...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94 911 1994-98
$10,902.10
Make a selection
Complete carburetion kits !
Complete kits include pre-jetted and sized carburetors, manifolds, linkage, K&N watershield air cleaners, pressure control unit, heat insulator kit, oil tank breather, fuel line & filter, clamps, injector plugs (as needed), power brake check valve (as needed) and complete installation instructions.
The pmo carburetor was designed from the beginning to be a state-of-the art carburetor. Pmo start off with a casting designed around a 50mm throttle plate and downsized to 46 and 40mm to achieve three different sizes. This compares favorably with conventional carburetors, including weber.
The air entry and flow is much greater than the weber. This is accomplished by having larger ma...(choose a part on the right to read more)
General Fitment 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$10,363.66
Make a selection
FVD "brombacher" level 1 tuning kit for the 2009- 997s includes our FVD flashload software cable, a single user diagnostic tool with software and a bmc sport air filter+ sport muffler set and x-cross pipe
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 12,5:1
Max. Power - 254kw (345hp) @ 6500rpm
Max. Torque - 390nm @ 4400rpm
Max. Speed - 300km/h (186mph)
Max. Rpm - 7500rpm
Acceleration 0-100km/h (0-60mph) - 4.8s
FVD level 1 tuning:
Max. Power - 272kw (370hp) @ 6500rpm
Max. Torque - 410nm @ 4500rpm
Max. Speed - 305km/h (191mph)
Max. Rpm - 7700rpm
Acceleration 0-100km/h (0-60mph) - 4.5s
For 25 years, FVD-Brombacherhas been setting the standard for Porsche tun...(choose a part on the right to read more)
General Fitment 911 2009-12
$4,574.90
Make a selection
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech has just released their new system of exhaust design with the x-cellerator cross-flow exhaust system. The cross-flow designed to offer the discerning Porsche enthusiast the ultimate exhaust system with a number of performance and sound options in one complete package. The cross-flow designed by combining the exhaust pulses from both sides of the Porsche boxer motor with an "x" of "cross-flow" at the center of the muffler. ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$3,773.25
Make a selection
Vivid racing's stage2 horsepower kit for the 997 turbo takes base of our stage 1 kit and adds a high flow titanium exhaust system. The agency power exhaust system features 200cell high flow cats, full titanium construction, reuses OEM tips, and a muffler design that has an amazing sound. The kit includes our vr tuned obdii ecu flash, agency power brv's, bmc air filter, ngk bkr7eix spark plugs, as wekk. The combination of these products will give you about 630bhp which is blistering fast. The kit starts the foundation which you can further build on. The ecu flash can be installed by yourself with the included cable. The exhaust system uses the factory style tips.
Our test vehicle was run at the palm bea...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$7,425.00
Make a selection
Consists of the parts necessary for a complete and professional tuneup! Air filter, oil filter, spark plugs (the expensive w4dpo variety), valve cover service kit, distributor cap, rev limiting rotor, fuel filter, ignition points and alternator belt.
General Fitment 914 1970-76
With the success of our vr825 kit achieving a 206.2mph at the texas mile event in march 2010, we thought we had squeezed the most we could out of the 997 turbo. But we were wrong. This is where we introduce our vr900. Built and based off all the principles and products of our other kit, the vr900 goes 1 step further with larger injectors and a special custom tune from us. Having proved its power capabilities in cars all over the world, we reflash the ecu via the obdii port to make the 997 turbo a true monster. With increased fueling from 80lb injectors over the stock 57lb ones, we are able to run the 997 turbo to a new level. Our test vehicle was a 2009 997 turbo tiptronic and on 93octane at 1.5bar of boost, we...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$21,600.00
Make a selection
For a perfect fit, reliability you can depend on, full adjustability, and optimum performance, the factory GT3 swaybar is the best on the market. We have packaged them together with new bushings and our adjustable drop links to provide you with a wining combination. The light weight hollow 26.8mm od sway bars are half the weight of a solid bar with the same stiffness. Complete with fully adjustable front drop links to eliminate suspension preload. Correctly sized, precision, teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends. All necessary hardware is provided in zinc ...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 911 2005-08 911 GT3 2007-11 CAYMAN 2006-08
23 wheel horsepower is gain by adding this intake to your Porsche 996 or 997 car. This intake has been tested numerous times on stock cars at the K&N facility gaining these numbers!
in addition to improved power, the K&N intake will give your engine a deeper sound on acceleration. Faster throttle response, and improved mid to high rpm performance is gained. No ecu tuning is necessary to achieve this horsepower gain. Although, we do vrtuned ecu tuning which out performs giac and is cheaper in price to gain an additional 10 wheel horsepower.
Installation can be done with basic hand tools. Total time for install is about 1 hour.
Features:
-guaranteed to provide more hp and increased acceleration
...(choose a part on the right to read more)
General Fitment 911 1998-05 911 2005-08
The light-weight hollow sway bars are half the weight of a solid bar with the same stiffness. they are fabricated from aircraft-quality 4130 chrome moly alloy steel and heat treated to maximize strength and reliability.
Bearing blocks, drop links, and swaybar arms are cnc machined from aircraft-quality 6061-t6 aluminum for its high strength/weight ratio.
Complete with fully adjustable drop links to eliminate suspension preload.
Correctly sized, precision, teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. no wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends.
All necessary hardware is provided in zinc plated...(choose a part on the right to read more)
The light-weight hollow sway bars are half the weight of a solid bar with the same stiffness. they are fabricated from aircraft-quality 4130 chrome moly alloy steel and heat treated to maximize strength and reliability.
Bearing blocks, drop links, and swaybar arms are cnc machined from aircraft-quality 6061-t6 aluminum for its high strength/weight ratio.
Complete with fully adjustable drop links to eliminate suspension preload.
Correctly sized, precision, teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. no wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends.
All necessary hardware is provided in zinc plated...(choose a part on the right to read more)
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|